Sealer Selection Guide: PE, Foil and Paper-Plastic Pouches
Published: 2026-11-17 Last updated: 2026-11-17
In short
For PE film bags in continuous production, use a continuous band sealer; for aluminum foil laminated pouches, use a constant-heat foil pouch sealer; for paper bags, first check whether they are paper-plastic laminated, because plain paper cannot be heat sealed; for small batches and frequent size changes, an impulse hand or foot sealer is more flexible; if the product needs vacuum, choose a chamber vacuum packaging machine.
1. Choose by pouch material
| Pouch | Suggested machine | Heating | Temperature / time | Speed | Sealing size |
|---|---|---|---|---|---|
| PE bags, PE inner bags, laminated pouches (continuous) | R86 continuous band sealer | Constant heat | 0-300°C | 1-20 m/min | Width made to order |
| PE and laminated bags (small batches) | Impulse hand / foot sealer | Impulse, no warm-up | Sealing time 0.1-3.0 s | 1-10 cycles/min | Length 200-1400 mm, width 2/3/5/8/10 mm |
| Aluminum foil laminated pouches | H-300 foil pouch sealer | Constant heat, tabletop pneumatic | 0-300°C digital | 1-10 cycles/min | Length 300-1400 mm |
| Large foil or laminated bags | RFK hand clamp sealer | Constant heat, section sealing | 0-300°C | Manual | Length 200-400 mm |
| Paper-plastic laminated pouches | Constant-heat roller sealer | Constant heat | Temperature display | Fixed roller speed | Seal width 10 mm |
| Vacuum pouches and foil pouches needing vacuum | Single chamber vacuum packer 400/500/600 | Impulse sealing | Automatic sealing after vacuum | 1-3 packs/min | Length 400/500/600 mm |
2. Starting seal temperatures
These are practical starting values for test sealing, not machine limits. Film thickness, laminate structure and room temperature all change the result; confirm with test seals and your film supplier.
| Material | Starting temperature | Adjustment |
|---|---|---|
| PE film and PE inner bags | 130-170°C | Raise temperature or slow down for weak seals; lower or speed up for burn-through |
| Laminated pouches (PET/PE etc.) | 150-190°C | More layers need steadier temperature and pressure |
| Aluminum foil laminated pouches | 170-210°C | Fast heat conduction; use constant heat and slightly longer sealing time |
| Paper-plastic laminated pouches | 150-180°C | Avoid excessive temperature to prevent discoloration of the paper surface |
3. Three steps to a decision
Step 1: identify the pouch material and structure.
Step 2: estimate daily output — impulse sealers suit dozens to hundreds of bags per day, continuous band sealers suit ongoing production.
Step 3: list extra needs such as vacuum, gas flushing or date coding, which determine the machine variant.
4. Common questions
What temperature should I use to seal PE bags?
Start test sealing around 130-170°C for common PE film. Thicker film usually needs a higher temperature or slower speed. These are starting points, not machine limits.
Can aluminum foil pouches be sealed with a standard film sealer?
Often not reliably. Foil laminates conduct heat quickly, so constant-heat or double-sided heating machines are more suitable.
Can plain paper bags be heat sealed?
No. Only paper-plastic laminated pouches with an inner PE coating can be heat sealed.
How do I convert sealing speed into bags per minute?
Bags per minute is roughly sealing speed divided by pouch length plus gap. Example: at 10 m/min with a 0.2 m pouch and 0.05 m gap, you get about 40 bags per minute before allowing for loading and handling.
How do I fix weak seals or burn-through?
Adjust temperature, speed and sealing time one variable at a time, and check that the heating block and silicone strip are flat and clean.
Need a recommendation?
Send us your pouch material, thickness, pouch size and daily output.
Contact our engineers