R&E Packaging Machinery Co., Ltd. +86-21-51083018|machine@repkm.com
R&E
PACKAGING MACHINERY · SINCE 2004

Home / Articles / Coding curved products

Coding Curved and Cylindrical Products Without Uneven Character Height

Coding · Inkjet · Published 2026-11-19

A date code printed on a flat pouch looks the same on every bag. On a bottle, a tube or a can it often does not: the first characters look taller than the last, or the code sits lower on one side. The printer is not faulty. The surface is.

Why the characters come out at different heights

An inkjet head is set up to fire at a fixed distance from the surface, and the conveyor is set to move the product past the head at a fixed speed. A curved product breaks both assumptions:

  • Distance changes. On a cylinder, only the point closest to the head is at the correct focal distance. The further the head travels along the arc, the more the surface falls away, and the dots spread out.
  • Surface speed changes. When a round product moves in a straight line, the part of the surface facing the head moves at a different speed than the top and bottom edges. The printer fires at a constant rate, so the characters stretch or compress.
  • The product rotates. A bottle on a flat conveyor often turns slightly as it passes, so the code starts on the front face and finishes on the shoulder.

The usual result is a code that is readable but inconsistent, which is exactly what a customer rejects at goods-in inspection.

The fixture: rotate the product, not the head

The solution we build is a rotating table with a tooling cup that holds the product under the print head. As the cup turns, the outer surface of the product passes the nozzle at a constant speed and a constant distance. Every character is printed under identical conditions, so the height stays the same from the first character to the last.

The fixture is not universal. We make it to match the product, and four things decide the design:

What we need to knowWhy it matters
Product diameterSets the cup size and the distance from the nozzle
Product materialDecides which ink will adhere and dry on the surface
Print areaConfirms that the code fits on one side, not around the whole product
Target outputConfirms whether one station is enough or several are needed

Ink has to match the material

The same head can print on plastic, glass, metal and coated paper, but not with the same ink. A solvent ink that bonds to HDPE may not adhere to glass or to an oily metal can. Where the surface is glossy or non-porous we test adhesion before quoting, because a code that rubs off in transit is worse than no code at all.

Throughput: what to expect

This is a manual-load setup. The operator places the product in the cup, the table indexes and prints, and the operator removes the product. Output therefore depends on how fast the operator can load and unload, not only on the printer speed.

For higher volumes we increase the number of stations or the diameter of the table, so that several products rotate and print in one cycle. That raises output without changing the printing principle.

When this setup is not the right choice

  • The code has to wrap around the whole circumference
  • The product is soft or deformable and will not hold its shape in a cup
  • Output targets require a fully inline conveyor with no manual handling
  • The product diameter varies widely within one order

In those cases a different head position, a different marking method or a dedicated inline system is usually the better answer, and we will say so before quoting.

Questions buyers ask

Why is the character height uneven when coding a curved product?

On a flat surface the head keeps a constant distance and the surface moves at a constant speed. On a curved product both change: the centre of the arc is closer to the head than the edges, and the surface speed varies as the product passes. Characters then look taller or shorter from one end to the other.

How does the rotating fixture solve it?

The product sits in a tooling cup that rotates it under the head. The outer surface passes the nozzle at a constant speed and a constant distance, so every character is printed under the same conditions. The fixture is made to the diameter of your product.

Can it print all the way around the product?

No. It prints one area on one side, such as a date, a batch number or a short code. It is not a full 360-degree wrap printer.

Is it slower than coding on a conveyor?

Yes. Each product is loaded and unloaded by hand, so output is lower than inline. For high volume we build several stations or a larger table so more products print in one cycle.

Send us the product diameter, material and a photo of the area to be printed. We will confirm whether a rotating fixture fits and what output to expect.

Related equipment

Request an assessment

Email machine@repkm.com or call +86-21-51083018 with your product details. Our engineers will tell you whether a rotary fixture is the right answer for your line.

Ask about coding curved products